What are the uses of silicon carbide rods? What are ceramic rods used for?
Release time:
2022-06-16
Silicon carbide rods What are the uses? What are ceramic rods used for?
With the development of science and technology, and the country's vigorous development of the new energy industry, silicon carbide rods have been recognized and widely used. In the new energy industry, the silicon carbide rollers in the roller kilns required for the production of lithium battery materials are gradually decreasing, replacing ceramic rollers. Silicon carbide rollers have high high-temperature load-bearing capacity, do not bend or deform during long-term use, and have a service life more than 10 times that of ceramic rollers. Today, I will share with you the specific uses of silicon carbide rollers and the uses of ceramic rollers.
What are the uses of silicon carbide rods?
1. Silicon carbide rollers are suitable for daily porcelain;
2. At present, sanitary ware has gradually expanded from tunnel kilns to roller kilns, and the roller kilns have begun to use silicon carbide rollers;
3. As for building ceramics, both the high-temperature and low-temperature sections of the kiln use silicon carbide rollers;
4. With Silicon carbide rods the increasing awareness, silicon carbide rollers are now used in the production of magnetic materials, therefore, their carrying capacity is large, and the weight they can bear is also heavier;
5. At present, silicon carbide rollers are also used as silicon carbide rollers, rotating through the drive shaft;
What are ceramic rods used for?
1. Ceramic rods and silicon carbide rods have both similarities and differences. Ceramic rods have better linearity. Therefore, ceramic rods are produced by hanging and firing, and have good linearity. Therefore, at the beginning, a large number of building ceramics factories used ceramic rods;
2. Low-temperature industrial kilns purchase more ceramic roller kiln rods, such as roller kilns in the glass-ceramic industry using ceramic rods;
3. The main function of ceramic rods is to convey ceramic or glass products. They are resistant to high temperatures and high heat, and regular cleaning of the rod surface is necessary;
4. Ceramic rods, also known as alumina rollers or corundum rollers, are white and easily oxidized;
That is to say, the silicon carbide rods mentioned above have multiple uses, and ceramic rods also have multiple uses. These two are different.
How to choose a silicon carbide rod cleaner?
Silicon carbide rod manufacturers tell everyone that in the regular maintenance and cleaning of silicon carbide rods, you must choose the correct and appropriate cleaning agent. Only in this way can the corrosion of silicon carbide rods be avoided. Next, let's take a look.
1. When choosing a silicon carbide rod cleaner, choose a product with fast cleaning speed and good descaling effect. The cleaning agent has a strong reaction, dispersion, or dissolution ability to dirt, which can reduce cleaning time.
2. According to the manufacturer of silicon carbide rods, avoid choosing corrosive cleaning agents, as some cleaning agents may corrode silicon carbide rods.
3. It is not necessary to choose an overly expensive silicon carbide rod cleaner. The main thing to look at is its composition, so as not to cause excessive consumption of resources.
4. Choose Silicon carbide rods a cleaning agent that does not affect the environment during use and does not cause pollution. Avoid the generation of waste gas, waste liquid, and waste residue, and it should meet relevant regulations.
5. During use, when cleaning silicon carbide rods, its surface will not leave insoluble substances, nor will it produce new stains, which will not affect the product quality of silicon carbide rods.
Okay, that's all for today. Thank you for watching.
